Brake and Clutch Lever Guards

AUD104.95
IT10014N

ITR brake lever guard is made out of high resistance plastic, with the objective of preventing any foreign objects gitting the brake lever and engaging the front brakes.

The lever guard is dynamically designed with the minimum weigth.

Image Gallery

{gallery}itr/Lever_Guards{/gallery}

AUD69.00
LG-BK

Race-Craft lever guards are designed to prevent other riders from making contact with your brake or clutch levers while racing.

Designed to fit almost all OEM with 13mm - 18mm internal diameter handlebars and race clip-ons.

These tough aluminium lever guards are adjustable in length and have a 30 degree bend in them making them less likely to interfere with rider's hands.

  • All Lever Guards are machined from 6061 billet aluminum
  • Curved body for safe dismounting from your motorbike  
  • 45mm of adjustment and up to 171mm in total length
  • Break-away tip to help avoid bikes and riders from becoming attached after collision  
  • Kits are available with Black, Blue, Gray, Green and Orange brake-away tips
  • Kit designed to properly fit most OEM and after-market clip-ons

The Race-Craft lever guards come as a set of brake and clutch lever guards.

Note: Race-Craft lever guards include free shipping in Australia.

Image Galery

{gallery}rc-lever-guards{/gallery}

AUD99.95
MLBLG15.7

Motionlgoics Brake Lever Guard - Internal Diamater 15.7 - 17 mm for aftermarket Clip-Ons

Motionlogics CNC Machined  "Motorcycle Brake Lever Guard"

Check out our Face Book page  "Motionlogics SA"

Motionlogics Brake Lever Guard are designed to protect the side and  front of your brake lever from being accidentally applied in tight situation with another rider while racing.

Image Gallery

{gallery}motionlogics/leverguard{/gallery}

Motionlogics Motorcycle Brake Lever Guard is available to suitable for most motorcycle clip ons. It's ergonomic offset from the end of your bar combined with a 30 degree drop on the side brake lever guard allows freedom for your hand to have excellent throttle control when hanging off the bike. The Brake Lever Guard has a adjustable protective arm to allow for various styles of brake levers. Motionlogics brake lever guard sturdiness is provided by the smart designed clamping system that is "clip on bar specific" Not one clamp suit's all clip on bars. A range of clamp sizes available from to diameters 15.7 to 19.3 internal diameter.  Motionlogics Brake Lever Guard's are available in black and silver anodised or a combination of the two.

When selecting a brake lever guard from the list careful to make sure you select the correct clamp to suit your requirements. 

 

  • Made in South Australia
  • CNC Machined
  • Aircraft Grade Alloy
  • Easily Installed in  few minutes
  • Available to suit different bar inside diameters
  • Hi Strength mounting system
  • Adjustable Guard length
  • Reversible to use as a Clutch Lever Guard
AUD99.95
MLBLGYZFR

Motionlgoics Brake Lever Guard - Yamaha R1 and R6 OEM Clip-Ons

Motionlogics CNC Machined  "Motorcycle Brake Lever Guard"

Check out our Face Book page  "Motionlogics SA"

Motionlogics Brake Lever Guard are designed to protect the side and  front of your brake lever from being accidentally applied in tight situation with another rider while racing.

Image Gallery

{gallery}motionlogics/leverguard{/gallery}

Motionlogics Motorcycle Brake Lever Guard is available to suitable for most motorcycle clip ons. It's ergonomic offset from the end of your bar combined with a 30 degree drop on the side brake lever guard allows freedom for your hand to have excellent throttle control when hanging off the bike. The Brake Lever Guard has a adjustable protective arm to allow for various styles of brake levers. Motionlogics brake lever guard sturdiness is provided by the smart designed clamping system that is "clip on bar specific" Not one clamp suit's all clip on bars. A range of clamp sizes available from to diameters 15.7 to 19.3 internal diameter.  Motionlogics Brake Lever Guard's are available in black and silver anodised or a combination of the two.

When selecting a brake lever guard from the list careful to make sure you select the correct clamp to suit your requirements. 

 

  • Made in South Australia
  • CNC Machined
  • Aircraft Grade Alloy
  • Easily Installed in  few minutes
  • Available to suit different bar inside diameters
  • Hi Strength mounting system
  • Adjustable Guard length
  • Reversible to use as a Clutch Lever Guard
AUD99.95
MLBLGGSXR

Motionlgoics Brake Lever Guard - Suzuki GSXR 1000 and GSXR 600 OEM Clip-Ons

Motionlogics CNC Machined  "Motorcycle Brake Lever Guard"

Check out our Face Book page  "Motionlogics SA"

Motionlogics Brake Lever Guard are designed to protect the side and  front of your brake lever from being accidentally applied in tight situation with another rider while racing.

Image Gallery

{gallery}motionlogics/leverguard{/gallery}

Motionlogics Motorcycle Brake Lever Guard is available to suitable for most motorcycle clip ons. It's ergonomic offset from the end of your bar combined with a 30 degree drop on the side brake lever guard allows freedom for your hand to have excellent throttle control when hanging off the bike. The Brake Lever Guard has a adjustable protective arm to allow for various styles of brake levers. Motionlogics brake lever guard sturdiness is provided by the smart designed clamping system that is "clip on bar specific" Not one clamp suit's all clip on bars. A range of clamp sizes available from to diameters 15.7 to 19.3 internal diameter.  Motionlogics Brake Lever Guard's are available in black and silver anodised or a combination of the two.

When selecting a brake lever guard from the list careful to make sure you select the correct clamp to suit your requirements. 

 

  • Made in South Australia
  • CNC Machined
  • Aircraft Grade Alloy
  • Easily Installed in  few minutes
  • Available to suit different bar inside diameters
  • Hi Strength mounting system
  • Adjustable Guard length
  • Reversible to use as a Clutch Lever Guard
AUD99.95
MLBLGZXR

Motionlgoics Brake Lever Guard - Kawasaki ZX10R and ZX6R 2009-15 OEM Clip-Ons

Motionlogics CNC Machined  "Motorcycle Brake Lever Guard"

Check out our Face Book page  "Motionlogics SA"

Motionlogics Brake Lever Guard are designed to protect the side and  front of your brake lever from being accidentally applied in tight situation with another rider while racing.

Image Gallery

{gallery}motionlogics/leverguard{/gallery}

Motionlogics Motorcycle Brake Lever Guard is available to suitable for most motorcycle clip ons. It's ergonomic offset from the end of your bar combined with a 30 degree drop on the side brake lever guard allows freedom for your hand to have excellent throttle control when hanging off the bike. The Brake Lever Guard has a adjustable protective arm to allow for various styles of brake levers. Motionlogics brake lever guard sturdiness is provided by the smart designed clamping system that is "clip on bar specific" Not one clamp suit's all clip on bars. A range of clamp sizes available from to diameters 15.7 to 19.3 internal diameter.  Motionlogics Brake Lever Guard's are available in black and silver anodised or a combination of the two.

When selecting a brake lever guard from the list careful to make sure you select the correct clamp to suit your requirements. 

 

  • Made in South Australia
  • CNC Machined
  • Aircraft Grade Alloy
  • Easily Installed in  few minutes
  • Available to suit different bar inside diameters
  • Hi Strength mounting system
  • Adjustable Guard length
  • Reversible to use as a Clutch Lever Guard